Ensure the encoder and decoder (ANT-7000E and ANT-700D) are at the same version of firmware



version: generic

In the example the file name is "firmware.ANT-7000.v340.01.bin"



copy "firmware.ANT-7000.v340.01.bin" onto a fat32 formatted USB memory stick and rename to "firmware.bin" 

Make sure this file is only file on the memory stick



1. power off encoder

2. plug in USB stick - adaptor is required for encoder : USB Type-A Female to USB Mini-B 5 Male Adapter

			something like https://www.amazon.co.uk/AKORD-Female-Mini-Male-Adapter/dp/B00303HSSG

3. power on encoder, the LED will flash quickly

4. Once the LED stop this fast flashing (about 5 minutes) power off cycle encoder

5. remove USB

6. power on

7. go to 192.168.0.171

8. Local S/W version Antrica.340.01(2019.09.02-11:37:14)



9. for decoder repeat steps 1 thru' 6. In step 2 no adaptor is required



10. go to 192.168.0.172

11. Local S/W version Antrica.340.01(2019.09.02-11:37:14)