1. download file update-V1.1.2.0.13_usb_update.zip https://www.dropbox.com/scl/fi/epkqfj83pdxunbb19llmc/update-V1.1.2.0.13_usb_update.zip?rlkey=x7aww7wasoqd3osahkv0di6k4&dl=0

2. Extract and find "load_typec.bat" - but do not run it

unpack the attached file:
	You will have a directory of structure:
	firmware		- Directory of the image
	load_typec.batuuu.exe	- NXP application for update
	uuuload_typec.uuu	- Script for update
	type of load_typec.bat	- Operate the update batch

3. SSH into ANT-1776
username / password is  root / root
copy and paste the below command followed by return

dd if=/dev/zero of=/dev/mmcblk2 bs=1K seek=32 count=1024

3. Connect the board to PC using USB type C (on board side)

4. double click "load_typec.bat" to run
messages will indicate if connection had been established

5. in SSH connection type    reboot     + return

6. When "load_typec.bat" closes, in SSH connection type reboot + return

7. Wait for 1-2 minute until Linux start running again.

8. when webpage is present, using the webpage perform a "Factory Default" and a reboot

9. ANT-1776 is now 1.1.2.0.13